Spark Plug: Adjustment
WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
Clean the spark plugs using a wire brush.
Clean and remove the carbon or oxide deposits.
But do not wear away ceramic insulator at this time.
If deposits are too stubborn, replace the spark plugs.
After cleaning the spark plugs, measure the spark plug gap using a gap gauge.
NOTE:
Do not use a plug cleaner because the spark plugs are applied with platinum tip.
Spark plug gap L:
1.0 - 1.1 mm (0.039 - 0.043 in)