Operating Cylinder: Installation

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.
NOTE: Before installing the operating cylinder, apply grease (SUNLIGHT 2: Part No. 003602010) to the contact point of the release lever and operating cylinder.

Tightening torque:

T1: 18 N.m (1.8 kgf-m, 13.0 ft-lb)

T2: 37 N.m (3.8 kgf-m, 27.5 ft-lb)

Fig 1: Identifying Clutch Hose And Operating Cylinder
After bleeding air from the operating cylinder, ensure that the clutch operates properly.
< Ref. to CLUTCH FLUID AIR BLEEDING . >