Check Illumination Circuit

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

DIAGNOSIS PROCEDURE

Step	Check	Yes	No
1 CHECK ILLUMINATION CIRCUIT POWER SUPPLY. Turn the ignition switch to OFF. Disconnect the clock harness connector. Turn the ignition switch and lighting switch to ON. Measure the voltage between the clock harness connector and chassis ground. Connector & terminal (i59) No. 1 (+) - Chassis ground (-):	Is the voltage more than 10 V?	Replace the clock body.	Check the harness for a open or short between the fuse and clock.