Passenger's Airbag Module: Removal
WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Refer to "CAUTION" of "General Description" before handling the airbag module. < Ref. to
CAUTION , General Description. >
- Turn the ignition switch to OFF.
- Disconnect the ground cable from battery and wait for at least 20 seconds before starting work.
- Remove the instrument panel. < Ref. to INSTRUMENT PANEL (EXCLUDING STEERING SUPPORT BEAM) , REMOVAL, Instrument Panel Assembly. >
- Remove the pawl, and remove the passenger's airbag module.
- Refer to "CAUTION" for handling of a removed airbag module. < Ref. to CAUTION , General Description. >