Roll Connector: Removal
WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition switch to OFF.
- Disconnect the ground cable from battery and wait for at least 20 seconds before starting work.
- Remove the driver's airbag module. < Ref. to REMOVAL , Driver's Airbag Module. >
- Remove the steering wheel. < Ref. to REMOVAL , REMOVAL, Steering Wheel. >
- Remove the steering column cover.
- Remove the screws, and then remove the roll connector.