Side Airbag Sensor: Removal
WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition switch to OFF.
- Disconnect the ground cable from battery and wait for at least 20 seconds before starting work.
- Remove the center pillar lower trim. < Ref. to REMOVAL , Lower Inner Trim. >
- Remove the center pillar inner protector lower.
- Remove the front outer seat belt retractor. < Ref. to OUTER SEAT BELT ASSEMBLY , REMOVAL, Front Seat Belt. >
- Remove the nut and disconnect the airbag connector to remove side airbag sensor.