FixVault
Home › Subaru › 2008 › Outback XT Limited, Standard › Repair and Diagnosis › External Pages › Different car › Section 103 (A/T Control Systems) › AT Steering Shift Switch › Installation

AT Steering Shift Switch: Installation

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean all parts before installation.
  2. Install in the reverse order of removal.
  3. After completing installation, set the select lever to the SPORT shift side and confirm that manual mode "1" illuminates on the combination meter.
  4. Operate the steering shift switch and confirm that "2" illuminates on the combination meter.
About FixVault