FixVault
Home › Subaru › 2008 › Tribeca Base › Repair and Diagnosis (Single Page) › Body & Frame › Door Locks › Anti-Theft System & Door Lock System - Security And Locks › Keyless Entry Control Module › Removal

Keyless Entry Control Module: Removal

  1. Disconnect the ground cable from the battery.
  2. Remove the glove box. <Ref. to REMOVAL , Glove Box.>
  3. Remove the nut, then disconnect the connector to remove the keyless entry control module.
    Fig 1: Locating Nut And Keyless Entry Control Module
    G05033666Courtesy of SUBARU OF AMERICA, INC.
About FixVault