FixVault
Home › Subaru › 2008 › Tribeca Base › Repair and Diagnosis › Brakes › Traction Control › Abs - Vehicle Dynamics Control (VDC) System › Yaw Rate and G Sensor › Removal

Yaw Rate and G Sensor: Removal

  1. Disconnect the ground cable from the battery.
  2. Remove the console box. < Ref. to CONSOLE BOX . >
  3. Disconnect the connector from the yaw rate & lateral G sensor.
  4. Remove the yaw rate & lateral G sensor.
    CAUTION: Do not drop or bump the yaw rate & lateral G sensor.
    Fig 1: Locating Yaw Rate And G Sensor
    G05032686Courtesy of SUBARU OF AMERICA, INC.
About FixVault