FixVault
Home › Subaru › 2008 › Tribeca Base › Repair and Diagnosis › Engine Mechanical › Lubrication System › Engine Lubrication System - Lubrication › Oil Pressure Switch › Removal

Oil Pressure Switch: Removal

  1. Set the vehicle on a lift.
  2. Disconnect the ground cable from the battery.
  3. Lift up the vehicle.
  4. Remove the under cover.
  5. Disconnect the terminal from oil pressure switch.
    Fig 1: Identifying Oil Pressure Switch Connector
    G05668073Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the oil pressure switch.
    Fig 2: Identifying Oil Pressure Switch
    G05668074Courtesy of SUBARU OF AMERICA, INC.
About FixVault