FixVault
Home › Subaru › 2008 › Tribeca Base › Repair and Diagnosis › Engine Mechanical › Mechanical › Engine Intake System - Intake (Induction) › Air Cleaner Case › Removal

Air Cleaner Case: Removal

  1. Disconnect the ground cable from the battery.
  2. Remove the air intake duct. < Ref. to REMOVAL , Air Intake Duct . >
  3. Disconnect the connector from mass air flow and intake air temperature sensor.
    Fig 1: Locating Mass Air Flow And Intake Air Temperature Sensor
    G05031139Courtesy of SUBARU OF AMERICA, INC.
  4. Loosen the clamp (A) which connect the air cleaner case (rear) to intake duct.
  5. Remove the clip (B) on the upper side of air cleaner case.
    Fig 2: Identifying Air Cleaner Case (Rear) Clip And Clamp
    G05031143Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the air cleaner case (rear) and air cleaner element.
    Fig 3: Identifying Air Cleaner Case (Rear) And Air Cleaner Element
    G05031144Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the bolts (A) and nut (B) which secure the air cleaner case to body.
    Fig 4: Identifying Air Cleaner Case Bolts And Nuts
    G05345672Courtesy of SUBARU OF AMERICA, INC.
  8. Remove the air cleaner case (front).
About FixVault