Rear Lateral Link: Installation

NOTE:

Be sure to use a new self-locking nut.
Always tighten the stabilizer bushing in the state where the vehicle is at curb weight and the wheels are in full contact with the ground.

Install in the reverse order of removal.
Tightening torque:

Rear lateral link

120 N.m (12.2 kgf-m, 89 ft-lb)

Shock absorber

120 N.m (12.2 kgf-m, 89 ft-lb)

Stabilizer link

60 N.m (6.1 kgf-m, 44 ft-lb)
Inspect the wheel alignment and adjust if necessary.