Crankshaft Position Sensor: Removal

1. Disconnect the ground cable from the battery.
   Fig 1: Disconnecting Ground Cable Of Battery

   Courtesy of SUBARU OF AMERICA, INC.
2. Remove the bolt which installs crankshaft position sensor to cylinder block.
   Fig 2: Identifying Crankshaft Position Sensor Bolt

   Courtesy of SUBARU OF AMERICA, INC.
3. Remove the crankshaft position sensor, and then disconnect the connector from it.

Fig 3: Identifying Crankshaft Position Sensor

Courtesy of SUBARU OF AMERICA, INC.