Front Lateral Link: Installation
CAUTION:
- Be sure to use a new self-locking nut.
- Always tighten the bushing in the state where the vehicle is at curb weight and the wheels are in full contact with the ground.
- Install in the reverse order of removal.
Tightening torque:
Front lateral link - Sub frame
100 N.m (10.2 kgf-m, 73.8 ft-lb)
Front lateral link - Rear axle housing
60 N.m (6.1 kgf-m, 44 ft-lb)
- Inspect the wheel alignment and adjust if necessary.