Variable Valve Lift Diagnosis Oil Pressure Switch: Removal

1. Disconnect the ground cable from the battery.
   Fig 1: Disconnecting Ground Cable Of Battery

   Courtesy of SUBARU OF AMERICA, INC.
2. Remove the air intake chamber. Refer to REMOVAL , Air Intake Chamber .
3. Remove the engine harness connector from the bracket.
4. Disconnect the connector from the variable valve lift diagnosis oil pressure switch.
5. Remove the variable valve lift diagnosis oil pressure switch.

• LH side
  Fig 2: Locating Oil Pressure Switch (LH Side)

  Courtesy of SUBARU OF AMERICA, INC.
• RH side

Fig 3: Locating Oil Pressure Switch (RH Side)

Courtesy of SUBARU OF AMERICA, INC.