Rear Seat Belt: Installation

CAUTION:

During installation, make sure that the seat belts are not twisted.
After installation, make sure that the seat belts are smoothly extended and wound.
Check that the center seat belt is not assembled wrongly.

Install in the reverse order of removal.
Tightening torque:

Refer to REAR SEAT BELT , COMPONENT, General Description.
Route the seat belt as shown in the figure below, and affix with Velcro tape.
- LH side
Fig 1: Routing Seat Belt (LH Side)
Courtesy of SUBARU OF AMERICA, INC.
- RH side
Fig 2: Routing Seat Belt (RH Side)
Courtesy of SUBARU OF AMERICA, INC.
Attach the seat cushion, and pull out the center seat belt assembly.

Fig 3: Pulling Out Center Seat Belt Assembly

G05957674

Courtesy of SUBARU OF AMERICA, INC.