Section 7 (Clutch System): Flywheel: Installation

1. Install the flywheel and ST.

   ST 498497100 CRANKSHAFT STOPPER

   Fig 1: Identifying Flywheel And ST

   Courtesy of SUBARU OF AMERICA, INC.
2. Tighten the flywheel mounting bolts to the specified torque.
   NOTE: Tighten the flywheel attachment bolts gradually. Each bolt should be tightened to the specified torque in crisscross order.

   Tightening torque: 

   72 N.m (7.3 kgf-m, 53.1 ft-lb) 

   Fig 2: Identifying Flywheel Mounting Bolts Tightening Sequence

   Courtesy of SUBARU OF AMERICA, INC.
3. Install the clutch disc and cover. Refer to INSTALLATION , Clutch Disc and Cover.
4. Install the transmission assembly.

Refer to INSTALLATION , Manual Transmission Assembly.