Engine Coolant Temperature Sensor: Removal

WARNING: This page is about a different variant/trim than selected.

Disconnect the ground cable from battery.

Fig 1: Disconnecting Ground Cable From Battery
Courtesy of SUBARU OF AMERICA, INC.
Remove the generator. Refer to REMOVAL , Generator.
Drain engine coolant. Refer to DRAINING OF ENGINE COOLANT , REPLACEMENT, Engine Coolant.
Disconnect the connectors from the engine coolant temperature sensor.

Fig 2: Identifying Engine Coolant Temperature Sensor Connectors
Courtesy of SUBARU OF AMERICA, INC.
Remove the engine coolant temperature sensor.