Turbine Speed Sensor 1: Installation

Install the turbine speed sensor 1.
Tightening torque: 7 N.m (0.7 kgf-m, 5.2 ft-lb)
Connect the turbine speed sensor 1 connector.

Fig 1: Identifying Turbine Speed Sensor 1 Connector
Courtesy of SUBARU OF AMERICA, INC.
Lower the vehicle.
Install the intercooler. (Turbo model) Refer to INSTALLATION , Intercooler.
Install the air intake chamber. (Non-turbo model) Refer to INSTALLATION , Air Intake Chamber.