FixVault
Home › Subaru › 2009 › Outback i, Automatic › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission 4AT › Reduction Driven Gear › Disassembly

Reduction Driven Gear: Disassembly

  1. Remove the snap ring from reduction driven gear.
    Fig 1: Removing Snap Ring From Reduction Driven Gear
    G06337277Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the ball bearing from reduction driven gear using ST.

    ST 498077600 REMOVER

    Fig 2: Removing Ball Bearing From Reduction Driven Gear Using ST 498077600 Remover
    G06337278Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the snap ring from reduction driven gear.
About FixVault