FixVault
Home › Subaru › 2009 › Tribeca Base › Repair and Diagnosis (Single Page) › Body & Frame › Door Locks › Anti-Theft System - Security And Locks › Keyless Entry Control Module › Removal

Keyless Entry Control Module: Removal

  1. Disconnect the ground cable from battery.
  2. Remove the glove box. Ref. to REMOVAL , Glove Box.
  3. Remove the nut, disconnect the connector and remove the keyless entry control module.
    Fig 1: Locating Keyless Entry Control Module Nut
    G05033666Courtesy of SUBARU OF AMERICA, INC.
About FixVault