FixVault
Home › Subaru › 2009 › Tribeca Base › Repair and Diagnosis › Engine Performance › Engine Control Systems › Fuel Injection System (H6DO) › Knock Sensor › Removal

Knock Sensor: Removal

  1. Remove the collector cover.
  2. Disconnect the ground cable from battery.
  3. Remove the intake manifold. Ref. to REMOVAL , Intake Manifold.
  4. Disconnect the knock sensor connector.
  5. Remove the knock sensor from cylinder block.
    Fig 1: Identifying Knock Sensor Connector
    G05667586Courtesy of SUBARU OF AMERICA, INC.
About FixVault