FixVault
Home › Subaru › 2009 › Tribeca Base › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission 5AT › Turbine Speed Sensor 1 › Removal

Turbine Speed Sensor 1: Removal

  1. Remove the air intake chamber and intake boot. Ref. to REMOVAL , Air Intake Chamber.
  2. Lift up the vehicle.
  3. Disconnect the turbine speed sensor 1 connector.
    Fig 1: Identifying Turbine Speed Sensor 1 Connector
    G05022250Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the turbine speed sensor 1.
About FixVault