FixVault
Home › Subaru › 2009 › Tribeca Limited › Repair and Diagnosis › Engine Performance › Engine Control Systems › Fuel Injection System (H6DO) › Mass Air Flow and Intake Air Temperature Sensor › Removal

Mass Air Flow and Intake Air Temperature Sensor: Removal

  1. Disconnect the ground cable from the battery.
  2. Disconnect the connector from mass air flow and intake air temperature sensor.
    Fig 1: Locating Mass Air Flow And Intake Air Temperature Sensor
    G05031139Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the mass air flow and intake air temperature sensor.
    Fig 2: Locating Mass Air Flow And Intake Air Temperature Sensor
    G05031043Courtesy of SUBARU OF AMERICA, INC.
About FixVault