FixVault
Home › Subaru › 2009 › Tribeca Limited › Repair and Diagnosis › Engine Performance › Engine Control Systems › Fuel Injection System (H6DO) › Oil Flow Control Solenoid Valve › Removal › Exhaust Side

Exhaust Side

  1. Disconnect the ground cable from battery.
  2. Lift up the vehicle.
  3. Remove the under cover.
  4. Disconnect the connector from exhaust oil flow control solenoid valve LH.
    Fig 1: Identifying Exhaust Oil Flow Control Solenoid Valve LH
    G05667604Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the exhaust oil flow control solenoid valve LH.
    Fig 2: Identifying Exhaust Oil Flow Control Solenoid Valve LH
    G05667605Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the exhaust oil flow control solenoid valve RH in the same procedure as LH.
About FixVault