Remote Control Mirror Switch: Inspection

Move the remote control mirror switch to each position and check continuity between terminals.

Fig 1: Identifying Remote Control Mirror Switch Connector Terminals

Courtesy of SUBARU OF AMERICA, INC.

• Switch the change over switch to the right side:
  TERMINAL SWITCH REFERENCE CHART
  
  

  Switch position	Terminal No.	Standard
  OFF	-	1 MΩ or more
  UP	8 and 3, 6 and 7	Less than 1 Ω
  DOWN	8 and 6, 3 and 7	Less than 1 Ω
  LEFT	8 and 2, 6 and 7	Less than 1 Ω
  RIGHT	8 and 6, 2 and 7	Less than 1 Ω

• Switch the change over switch to the left side:
  TERMINAL SWITCH REFERENCE CHART
  
  

  Switch position	Terminal No.	Standard
  OFF	-	1 MΩ or more
  UP	8 and 4, 6 and 7	Less than 1 Ω
  DOWN	8 and 6, 4 and 7	Less than 1 Ω
  LEFT	8 and 5, 6 and 7	Less than 1 Ω
  RIGHT	8 and 6, 5 and 7	Less than 1 Ω

• Folding switch

  Switch Position	Terminal No.	Standard
  Folding	8 and 9, 7 and 10	Less than 1 Ω
  Unfolding	8 and 10, 7 and 9	Less than 1 Ω

Replace the remote control mirror switch if defective.