Combination Base Switch Assembly: Removal

WARNING: This page is about a different car, the 2009 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Remove the driver's airbag module. Refer to REMOVAL , Driver's Airbag Module .
Remove the steering wheel. Refer to REMOVAL , Steering Wheel .
Remove the screws, and remove the steering column lower cover.

Fig 1: Locating Steering Column Lower Cover Screw

Courtesy of SUBARU OF AMERICA, INC.

Remove the screws and steering column upper cover.

Fig 2: Locating Steering Column Upper Cover Screws

Courtesy of SUBARU OF AMERICA, INC.

Remove the combination switch. Refer to REMOVAL , Combination Switch (Light) . Refer to REMOVAL , Combination Switch (Wiper) .
Remove the four screws and remove the roll connector.
Remove the three screws.

Fig 3: Locating Combination Switch Screws

Courtesy of SUBARU OF AMERICA, INC.

Disconnect the connector and remove the combination base switch assembly.