Front Height Sensor: Removal

WARNING: This page is about a different car, the 2009 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Always remove the vehicle height sensor before removing any parts related to the suspension.

Disconnect the ground cable from the battery.
Lift up the vehicle and remove the left front wheel.
Remove the under cover.
Disconnect the sensor connector.

Fig 1: Identifying Front Vehicle Height Sensor Connector

Courtesy of SUBARU OF AMERICA, INC.

Fig 2: Locating Front Vehicle Height Sensor

Courtesy of SUBARU OF AMERICA, INC.

Remove the bracket from the front crossmember.
Remove the bracket from the transverse link.

CAUTION: Do not disassemble the sensor and lever.