FixVault
Home › Subaru › 2010 › Outback Limited › Repair and Diagnosis (Single Page) › Body & Frame › Door Locks › Anti-Theft System - Security And Locks › Keyless Entry Control Module › Removal › Sedan Model

Sedan Model

  1. Disconnect the ground cable from battery.
  2. Remove the rear shelf trim. Ref. to REMOVAL , Rear Shelf Trim.
  3. Remove the keyless entry control module.
    1. Disconnect the connector.
    2. Remove the bolt and remove the keyless entry control module.
      Fig 1: Removing Keyless Entry Control Module And Bolts (Sedan Model)
      G06653939Courtesy of SUBARU OF AMERICA, INC.
About FixVault