Fuel Sub Level Sensor: Installation

Install in the reverse order of removal while being careful of the following.

Make sure the sealing portion is free from fuel or foreign matter before installation.
Align protrusion (A) of the gasket to the position shown in the figure.
Align protrusion (B) of the fuel sub level sensor to the cutout in the fuel sub level sensor upper plate.
After tightening the bolts to the specified torque in the order indicated in the figure, install the fuel sub level sensor protector.

NOTE: Use a new gasket and retainer.

Tightening torque: 4.4 N.m (0.4 kgf-m, 3.2 ft-lb)

Fig 1: Identifying Fuel Tank Nuts Tightening Sequence

Courtesy of SUBARU OF AMERICA, INC.

Fig 2: Locating Fuel Sub Level Sensor Protector Bolts

Courtesy of SUBARU OF AMERICA, INC.