FixVault
Home › Subaru › 2010 › Outback Limited › Repair and Diagnosis › Engine Performance › Engine Control Systems › Fuel Injection System - Fuel Injection (Fuel Systems) (H4SO - 2.5L SOHC) › Oil Temperature Sensor › Removal

Oil Temperature Sensor: Removal

  1. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G06648487Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the air intake boot assembly. Ref. to REMOVAL , Air Intake Boot.
  3. Disconnect the connector from oil temperature sensor.
  4. Remove the oil temperature sensor.
    Fig 2: Locating Oil Temperature Sensor Connector
    G06648328Courtesy of SUBARU OF AMERICA, INC.
About FixVault