FixVault
Home › Subaru › 2010 › Outback Limited › Repair and Diagnosis › Transmission › Automatic Trans › Continuously Variable Transmission › Transmission Control Module (TCM) › Removal

Transmission Control Module (TCM): Removal

  1. Disconnect the ground cable from battery.
  2. Remove the instrument panel lower cover. Ref. to REMOVAL , Instrument Panel Lower Cover.
  3. Remove the bulkhead harness connector from TCM.
  4. Remove the TCM.
    NOTE: Replace TCM and bracket as a set.
    Fig 1: Identifying TCM
    G06654470Courtesy of SUBARU OF AMERICA, INC.
About FixVault