FixVault
Home › Subaru › 2010 › Outback R › Repair and Diagnosis (Single Page) › Engine Performance › Engine Control Systems › Fuel Injection System - Fuel Injection (Fuel Systems) (H6DO - 3.6L DOHC) › Engine Control Module (ECM) › Removal

Engine Control Module (ECM): Removal

  1. Disconnect the ground cable from battery.
  2. Remove the glove box lid assembly. Ref. to REMOVAL , Glove Box.
  3. Disconnect the connectors from ECM.
    Fig 1: Locating Engine Harness Of Fuel Injector Pipe LH
    G06651274Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the ECM from vehicle.
    Fig 2: Locating ECM Screws
    G06651299Courtesy of SUBARU OF AMERICA, INC.
About FixVault