FixVault
Home › Subaru › 2010 › Outback R › Repair and Diagnosis › Body & Frame › Windows › Window Glass System & Mirror System - Glass/Window/Mirrors › Relay and Fuse › Inspection › Check Relay

Check Relay

  1. Check the resistance between relay terminals.
    TERMINAL SPECIFICATION

    Terminal No. Inspection conditions Specification Circuit
    1 - 2 Always 1 MΩ or more
    G06653408Courtesy of SUBARU OF AMERICA, INC.
    1 - 2 Apply battery voltage to the terminals between 4 - 3 Less than 1 Ω
  2. Replace the relay if it is found defective.
About FixVault