Intake Manifold: Assembly

Liquid gasket: 

THREE BOND 1105 (Part No. 004403010) or equivalent 

Tightening torque: 

17 N.m (1.7 kgf-m, 12.5 ft-lb) 

1. Install the EGR valve. Ref. to INSTALLATION , EGR Valve.
2. Tighten the bolts which install fuel pipes on intake manifold.

Tightening torque: 

6.4 N.m (0.7 kgf-m, 4.7 ft-lb) 

Fig 1: Locating Fuel Pipes Bolts
Courtesy of SUBARU OF AMERICA, INC.
Fig 2: Locating Fuel Pipes Bolts
Courtesy of SUBARU OF AMERICA, INC.
3. Connect the fuel injector pipe to fuel hose, and tighten the clamp screw.

   Tightening torque: 

   1.25 N.m (0.1 kgf-m, 0.9 ft-lb) 

   Fig 3: Identifying Fuel Injector Pipe, Fuel Hose And Clamp

   Courtesy of SUBARU OF AMERICA, INC.
4. Install the purge control solenoid valve. Ref. to INSTALLATION , Purge Control Solenoid Valve.
5. Install the manifold absolute pressure sensor. Ref. to INSTALLATION , Manifold Absolute Pressure Sensor.
6. Install the engine harness to the intake manifold. Ref. to ENGINE HARNESS , COMPONENT, General Description.