Impact Sensor: Operation
WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- IMPACT SENSOR SETTING USING SUBARU SELECT MONITOR
- Prepare the Subaru Select Monitor kit.
- Turn the ignition switch to ON (engine OFF) and run the "PC application for Subaru Select Monitor".
- On << System Selection Menu >> display, select {Integ. unit mode}.
- Select {ECM customizing}.
- Perform impact sensor ON/OFF setting.
- Installed: ON
- Removed: OFF
- Perform impact sensor ON/OFF setting.
- Installed: ON
- Removed: OFF
- Turn the ignition switch to OFF and remove the Subaru Select Monitor.