FixVault
Home › Subaru › 2010 › Outback R › Repair and Diagnosis › External Pages › Different car › Section 103 (Security And Locks) › Keyless Buzzer › Removal

Keyless Buzzer: Removal

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Remove the front bumper face. Refer to FRONT BUMPER .
  3. Remove the keyless buzzer.
    1. Disconnect the connector.
    2. Remove the clip, and remove the keyless buzzer.
      Fig 1: Removing Keyless Buzzer And Clip
      G06653941Courtesy of SUBARU OF AMERICA, INC.
About FixVault