Front Wheel Speed Sensor: Removal
WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Be sure to prevent water or oil from contacting the connector terminal of front wheel speed sensor. If adhesion occurs, replace with a new part.
- When removing front wheel speed sensor, CVTF may let out. If CVTF has leaked, adjust the CVTF level after installing the front wheel speed sensor.
- Lift up the vehicle.
- Clean the transmission exterior.
- Remove the harness connector from front wheel speed sensor.
- Remove the front wheel speed sensor.