Primary Speed Sensor: Removal

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Be sure to prevent water or oil from contacting the connector terminal of primary speed sensor. If adhesion occurs, replace with a new part.

Remove the air intake boot assembly. Refer to AIR INTAKE BOOT IN(H4SO)-8, REMOVAL, Air Intake Boot.
Remove the harness connector from primary speed sensor.
Remove the primary speed sensor.

Fig 1: Locating Primary Speed Sensor Mounting Bolt
Courtesy of SUBARU OF AMERICA, INC.