Pipe Assembly: Installation

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Install each part in the reverse order of removal.
Tightening torque:

Refer to " COMPONENT " of "General Description". Refer to , HOSE AND TANK , COMPONENT, General Description.
Fill with recommended power steering fluid and perform air bleeding. Refer to , POWER STEERING FLUID .
CAUTION: Never start the engine before filling with fluid; otherwise the vane pump may become seized.