FixVault
Home › Subaru › 2011 › Forester XT Touring › Repair and Diagnosis › External Pages › Different variant/trim › Section 1 (Engine Intake System - Intake (H4DO)) › Air Intake Boot › Removal

Air Intake Boot: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the clip (A) from the air intake boot assembly.
  2. Loosen the clamp (B) which connects the air intake boot assembly and air cleaner case.
  3. Loosen the clamp (C) which connects the air intake boot assembly and throttle body.
    Fig 1: Identifying Air Intake Boot Assembly Clip And Clamp
    G07664986Courtesy of SUBARU OF AMERICA, INC.
  4. Disconnect the PCV hose assembly and remove the air intake boot assembly.
About FixVault