Operating Cylinder: Removal

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The illustration below is suitable for every model. Perform the same procedures for the other models.

Remove the collector cover. (turbo model)
Remove the air intake boot assembly. (non-turbo model) Refer to AIR INTAKE BOOT .
Remove the intercooler. (turbo model) Refer to INTERCOOLER .
Disconnect the clutch hose from the operating cylinder.
CAUTION:
- Cover the hose joint to prevent the clutch fluid from flowing out.
- Do not loosen or remove the cap bolt at the rear end of operating cylinder. (turbo model)
Fig 1: Identifying Clutch Hose, Cap Bolt And Operating Cylinder
Courtesy of SUBARU OF AMERICA, INC.
Remove the operating cylinder from the transmission.

Fig 2: Locating Operating Cylinder Bolts

Courtesy of SUBARU OF AMERICA, INC.