Input Clutch Pack Assembly

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Remove the front sun gear.

Fig 1: Removing Front Sun Gear
Courtesy of SUBARU OF AMERICA, INC.
Remove the thrust bearing.
Remove the snap ring, and then remove the front carrier.

Fig 2: Removing Snap Ring And Front Carrier
Courtesy of SUBARU OF AMERICA, INC.
Remove the input clutch assembly from rear internal gear.

Fig 3: Removing Input Clutch Assembly From Rear Internal Gear
Courtesy of SUBARU OF AMERICA, INC.