FixVault
Home › Subaru › 2011 › Outback Limited › Repair and Diagnosis › External Pages › Different car › Section 84 (Continuously Variable Transmission) › Forward Clutch Assembly › Removal

Forward Clutch Assembly: Removal

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission from the vehicle. Refer to , REMOVAL , Automatic Transmission Assembly.
  2. Remove the extension case. Refer to , REMOVAL , Extension Case.
  3. Remove the rear drive shaft. Refer to , REMOVAL , Rear Drive Shaft.
  4. Remove the transfer clutch assembly. Refer to , REMOVAL , Transfer Clutch.
  5. Remove the transfer reduction driven gear. Refer to , REMOVAL , Transfer Reduction Driven Gear.
  6. Remove the intermediate case. Refer to , REMOVAL , Intermediate Case.
  7. Remove the thrust needle bearing.
    Fig 1: Identifying Thrust Needle Bearing In Transmission
    G06654566Courtesy of SUBARU OF AMERICA, INC.
  8. Remove the forward clutch assembly.
    Fig 2: Identifyng Forward Clutch Assembly
    G06654567Courtesy of SUBARU OF AMERICA, INC.
  9. Remove the washer.
    Fig 3: Identifying Washer (View 1 Of 2)
    G06654568Courtesy of SUBARU OF AMERICA, INC.
About FixVault