Front Stabilizer: Installation

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Before installation, inspect the following items and replace any faulty part with a new one.
- Check the bushing for abnormal cracks, fatigue or damage.
- Check the stabilizer link for damage.
Install each part in the reverse order of removal.

CAUTION: The stabilizer bracket has a set orientation. Install it with the arrow mark facing the front side (1) of the vehicle.

Fig 1: Identifying Stabilizer Bracket With Bolts

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

Stabilizer bracket: 25 N.m (2.55 kgf-m, 18.4 ft-lb)

Stabilizer link: 60 N.m (6.12 kgf-m, 44.3 ft-lb)