Wheel Alignment: Inspection: Caster
WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Place the front wheel on the turning radius gauge. Make sure the ground contact surfaces of the front and rear wheels are at the same height.
- Set the adapter into the center of wheel, and then set the wheel alignment gauge.
- Measure the caster angle in accordance with the operation manual for wheel alignment gauge.
| Model | Caster |
|---|---|
| P205/60R16 P215/50R17 |
5°55' |
| P225/50R17 225/45R18 |
6°00' |
| P225/60R17 P215/70R16 |
5°05' |