Driver's Airbag Module: Removal

1. Position the front wheels straight ahead. (After moving a vehicle 5 m (16 ft) or more with front wheels positioned straight ahead, make sure that the vehicle moves straight ahead).
2. Turn the ignition switch to OFF.
3. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work.
4. Remove the driver's airbag module assembly.

Preparation tool: TORX® T30 

1. Loosen the two TORX® bolts on the sides of the steering wheel.
   Fig 1: Locating Steering Wheel Torx® Bolts

   Courtesy of SUBARU OF AMERICA, INC.
2. Disconnect the airbag connector and remove the airbag module assembly. Refer to Airbag Connector  DRIVER'S AIRBAG MODULE, CURTAIN AIRBAG MODULE & PRETENSIONER, PROCEDURE .
3. Disconnect the horn harness.

Fig 2: Disconnection Horn Harness

Courtesy of SUBARU OF AMERICA, INC.