Passenger's Airbag Module: Installation
CAUTION:
- Refer to CAUTION of "General Description" before handling the airbag module.
- Do not allow harness and connectors to interfere or get tangled up with other parts.
- Do not reuse the clips in the upper section of the front pillar trim. Always replace them with new ones.
Once removed from the pillar trim, the clip retention power deteriorates and the front pillar trim may come off.
- Before installation, inspect the following items and replace any faulty part with a new one.
- Passenger's airbag lid (instrument panel surface) is cracked or deformed.
- Airbag module is cracked or deformed.
- Harness and/or connector is cracked, deformed or open.
- Harness wire is exposed.
- Mounting bracket is cracked or deformed.
- Install each part in the reverse order of removal.
Tightening torque:
Passenger's airbag module: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)
Console box: 6.5 N.m (0.66 kgf-m, 4.8 ft-lb)