FixVault
Home › Subaru › 2011 › Outback Limited › Repair and Diagnosis › Transmission › Automatic Trans › Continuously Variable Transmission (CVT) › Transmission Harness › Inspection

Transmission Harness: Inspection

  1. Visually check the harness and connector for damage or crack.
  2. Check the harness terminal for rust, disconnection or poor contact.
  3. Check the continuity between harness terminals and oil temperature sensor.
    NOTE: Refer to WIRING SECTION for transmission harness terminal and oil temperature sensor terminal. Refer to WI-94, WIRING DIAGRAM, CVT CONTROL SYSTEM .

    Harness continuity standard 

    Less than 1 Ω 

    Oil temperature sensor standard 

    Approx. 2.6 kΩ (at 20°C) 

About FixVault