Air Intake Boot: Removal

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Remove the cover (A) and clip (B) from air intake boot assembly.

Fig 1: Identifying Cover And Clip Of Air Intake Boot Assembly
Courtesy of SUBARU OF AMERICA, INC.
Loosen the clamp (A) which connects the air intake boot assembly and air cleaner case.
Loosen the clamp (B) which connects the air intake boot assembly and throttle body.

Fig 2: Identifying Air Intake Boot Clamps
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the blow-by hose and remove the air intake boot assembly.